MH8000P Pre-Programmed TENS and EMS device
Power source: DC 9V battery or mains power adapter.
The MH8000P Pre-Programmed unit integrates with 27 preset programs and 3 programmable programs.
The preset programs are prepared in the factory according to the customer's parameters. The programmable programs are available to be set and stored by user.
This unit is a portable, light weight and battery-powered electronic unit.
1. Dual Channel, isolated between channels.
2. Timer setting from 5-90 Minutes, 5min./step, or continue.
3. Time count down monitored on LCD screen.
4. Automatic switch off after 30 seconds if unit is not in use.
5. Waveform: Asymmetrical rectangular biphasic pulse.
6. Amplitude: 0 - 80 mA into 500 ohm load.
7. Selectable pulse width: Adjustable, from 50us - 300us, 10us/step.
8. Pulse Rate: Adjustable, from 2 Hz - 150 Hz, 2Hz~20 Hz in 1 Hz/step and 20~ 150 Hz in 5 Hz/step.
9. Modes:
S (Synchronous) Mode, A (Alternative) Mode
N (Normal) Mode, M (Mixed Frequency) Mode, B (Burst) Mode, SD (Width Modulation) Mode, MR (Rate Modulation) Mode
10. Contraction Time: Adjustable, from 2-90 seconds, 1sec./step, (EMS only).
11. Relaxation Time: Adjustable, from 2-90 seconds, 1sec./step, (EMS only).
12. Ramp Time: Adjustable, from 1-8 seconds, 1sec./step, (EMS only).
13. The compliance meter: The user compliance timer can memorize 100 sets session records; the total record time is 400 hours; 240 minutes for a single session.
